Wu Han Micro Control Electric Co., Ltd.
Wu Han Micro Control Electric Co., Ltd. High aspirations,Customer orientation,Honest and trustworthy,Solidarity and collaboration !
Add to Cart
Base-plate Magnetic Powder Clutch 400NM Voltage 24V 3.0 A For Slitting Machine
General introduction:
The magnetic powder clutch is composed of active rotor (input shaft),driven rotor(output shaft) and yoke with excitation coil. The three parts are assembled relative concentric and form a system which can rotate relatively. The annular gap between active rotor and driven rotor is full of magnetic alloy powder which has high magnetic conductivity.
The magnetic powder will be in the state of loose situation when the current do not pass the excitation coil, the magnetic powder will be thrown on the inner wall of active rotor, in this case, there will not exist the interaction force between the active and driven rotor. So the magnetic powder clutch is in the state of separation, no torque transmission exits.
The magnetic powder in the working chamber will link in a link state under the action of the magnetic flux generated from the yoke when the current pass the excitation coil. The magnetic powder clutch can transfer torque relying on the shear force generated from magnetic chain and the friction generated from the magnetic powder and working face. In this situation, the magnetic powder clutch is in the combination state.
When the current is cut off, the magnetic flux will disappear along with the disappearance of the magnetizing current, the magnetic powder will be in the state of loose under the action of gravity again, and will be thrown on the inner wall of active rotor under the action of the centrifugal force.
In this case, the magnetic powder clutch will be in the state of separation again.
The magnetic powder clutch and brake have the same principle, the magnetic powder brake will form as long as driven rotor of the magnetic powder clutch is fixed.
Application
Due to the features of the magnetic powder clutch and brake ,they have been widely used in paper making ,printing, plastic items, rubber industry, textile industry and dyeing, wire and cable, metallurgy industry and tension control of winding and unwinding in roll material processing industry.
| Model | (N.M)Rated Torque | DC Excitation | (r/min) Allowable rotational speed | Slip power w | Outline dimension | |||
| Voltage V | Current A | Self-cooling | Air-cooling | H | L | |||
| PCS-6F | 6 | 24 | 0.9 | 1500 | 70 | 130 | 150 | 146 |
| PCS-12F | 12 | 24 | 1 | 1500 | 150 | 250 | 166 | 156 |
| PCS-25F | 25 | 24 | 2 | 1500 | 230 | 380 | 213 | 186 |
| PCS-50F | 50 | 24 | 2.3 | 1500 | 360 | 700 | 240 | 220 |
| PCS-100F | 100 | 24 | 2.5 | 1500 | 600 | 1100 | 315 | 280 |
| PCS-200F | 200 | 24 | 2.5 | 1000 | 860 | 1900 | 368 | 296 |
| PCS-400F | 400 | 24 | 3 | 1000 | 1300 | 2800 | 419 | 416 |
| PCS-1000F | 1000 | 36 | 3.5 | 750 | 2400 | 4000 | 533 | 640 |
| PCS-2000F | 2000 | 36 | 5 | 450 | 4000 | 6000 | 619 | 733 |
| Model | Shaft Size | Base support size | ||||||||||
| d(h7) | b(p7) | T | L1 | L2 | L3 | L4 | L5 | L6 | H1 | d1 | h | |
| PCS-6F | 12 | 4 | 13.5 | 25 | 23 | 50 | 68 | 120 | 140 | 80 | 9 | 12 |
| PCS-12F | 14 | 5 | 16 | 25 | 23 | 60 | 85 | 120 | 150 | 90 | 10 | 12 |
| PCS-25F | 20 | 6 | 22.5 | 36 | 22 | 70 | 96 | 150 | 180 | 120 | 12 | 15 |
| PCS-50F | 25 | 8 | 28 | 42 | 28 | 80 | 105 | 180 | 210 | 130 | 12 | 16 |
| PCS-100F | 30 | 8 | 33 | 58 | 32 | 100 | 130 | 250 | 290 | 170 | 12 | 18 |
| PCS-200F | 35 | 10 | 38 | 58 | 30 | 120 | 165 | 280 | 330 | 200 | 15 | 22 |
| PCS-400F | 45 | 14 | 48.5 | 82 | 61 | 130 | 180 | 330 | 390 | 220 | 15 | 22 |
| PCS-1000F | 70 | 20 | 74.5 | 105 | 135 | 160 | 210 | 470 | 540 | 280 | 19 | 35 |
| PCS-2000F | 80 | 22 | 85 | 130 | 151.5 | 170 | 240 | 580 | 660 | 330 | 24 | 40 |
Packing
Standard export package: each unit has individual box and all boxes are packed in standard packages.
Shipping
Products are shipped from china. We will sent out within 15 working days after the payment. We usually sendthe parcel by DHL, EMS and TNT etc. The tracking number will be sent to you after delivery. It usually takes 3--5 working days to reach your side which depend on the country delivery to.
We supply tension control system and web guiding system for about 20 years already.Cooperate with Wuhan University and our engineer are powerfull and professinal.Even Mitsubishi bought from us and said our quality is amazing and price low.
After all the efforts of our man about 2/3 market in China is ours now and we want to enlarge our market abroad,with high quality and low price,we wellcome all customer judge and test us.
Our warranty is 2 years,that mean any products failed within 2 years,we will replace or repaire for free.
Quality is our llife and we always try our best to make according to your requirements.
If you have any other questions,please call us free!