Wu Han Micro Control Electric Co., Ltd.
Wu Han Micro Control Electric Co., Ltd. High aspirations,Customer orientation,Honest and trustworthy,Solidarity and collaboration !
Add to Cart
Auto Tension Controller feedback Two Reel Control With Tension Loadcells ST-3600 magentic powder controller
ST-3600 Auto tension controller
Feedback Control Tension Controller Two Reel Control With Two 50kg Tension Loadcells
Characters:
ST-3600 is a simple but powerful tension controller.The Guide of its panel operations is as follows:
1. Button of output on/off switch : switch on the output for outputs between terminals PA-PAN,SA-GND or PB-GND, SB-GND ; switch off the output for "off" on LED display and controller provides no output at all.
2. Manual/automatic mode switch button : change status between manual and automatic by pressing the button.
3. Page turning button: turn page of LCD display screen.
| Parameters | ||
| Model | ST-3600 | |
| Power Supply | AC 180~260V 50/60HZ | |
| Input | Analog singal | 1. L+~L-;R+~R-;Left,right tension loadcell signal input STS tension loadcell signal (0~200mv,power supply DC5V) STSA tension loadcell signal(0~15mv;power supply DC5v) |
| Digital signal | 1. MC0:Main axle proximity switch speed signal ( proximity switch PNP Type,voltage supply DC24V) 2. MC1,MC5,MC6:points control signal (24V+high electric control signal) | |
| Output | Main output | PA,PB:Two roads 24V/4A power output directly drive magnetic powder clutch or brake |
| Auxiliary output | SA,SB:Two roads DC0~10V/0~5V output can drive torque type inverter Synchronously, SA and PA main axle output changes synchronously,SB and PB main axle output changes synchronously. | |
| Outline size | 246*154*114mm | |
Terminal Connection:
1. Used one sets of output power of 24V/4A or two sets output power of 24V/3A from PA-PAN or PB-PBN terminals to drive powder brake/clutch.
2. Use two sets of analog output voltage of 0~10v from SA-AGND or SB-AGND terminals to drive torque motor or torque mode converter.
3. Use one set of constant analog output voltage of 5V from 5V+~5V- terminals to supply power to tension detectors installed at both left and right sides.
4. Use one set of constant analog output voltage of 24V from 24V+~24V- terminals to supply power approch switch.
Tension loadcell models avaiable:
| Model | STS-010 | STS-030 | STS-050 | STS-100 | STS-200 | STS-500 |
| Power supply | DC5V | |||||
| Rated Voltage | Small base: 10~100kg; Large base: 200kg~500kg | |||||
| Working Principle | Differential type | |||||
| Rated Output | 0~180mv | |||||
| Bearing | P204 ball shape universal bearing P204 | |||||
| Electrical Connection | +5v:Red GND:Black Signal(+):Yellow Signal(-):Green | |||||
| Outsize | Small base:134*44*78mm Large base: 150*68*78mm | |||||
| Bearing mm | Rated Stroke kg | Size mm | |||||||||||
| D | d1 | d2 | d3 | d4 | b1 | b2 | b3 | b4 | b5 | h | u1 | ||
| 25 | 12.5/20/37.5/75/150 | 52 | 70 | 31 | 125 | 95 | 48 | 15 | 12.2 | 4 | 19.6 | 157.5 | 6.6 |
FAQ
1. How can you contact us?
Pls contact us by email,Skype,Whatsapp.
2. How can you place the order from us?
You can let us know your detail request,we can design the best solution for you;and if you have your detail engineer drawing,pls don’t hesitate to send us.
3. What is the MOQ in our company?
As for most of products,we don’t have MOQ.
4. What is your delivery time of the products?
For air shaft and other customized products need time to manufacture,the delivery time is about 7~15days;For Magnetic powder brake/clutch,Air disc brake/clutch,tension control system…etc,we have stock in factory,the delivery time is 3~5days.
5. What is your trade term?
Usually we accept trade by EXW,FOB,CIF…etc,you can choose the best way you would like.
